Cooper-instruments-systems DFI INFINITY Digital Force Indicator/Controller Manual de usuario descargar pdf (Pagina 15)

Figure 5-3. Transformer Jumpers

5.2.3 Printed Circuit Board(s) Installation

To install optional printed circuit board(s):

1. “Reveal the Main Board” (refer to Section 5.2, Disassembly).

2. Using Figure 5-4 as a reference, insert option board(s) into the corresponding slot(s) on the main board. Each

circuit board is keyed to fit in it’s own position.

Figure 5-4. Optional Printed Circuit Board Locations

5.2.4 How To Access Jumpers

To gain access to jumper S1 and S2 used to configure input type remove the mounting sleeve. The jumpers may

be accessed through the slot in the case.

To gain access to jumpers on the main board for power, excitation and lockout selection:

1. “Reveal the main board” (refer to Section 5.2, Disassembly).

NOTE: To access the S1 and S2 jumpers on the Signal Input Board, you only need to remove the mounting

sleeve.

2. To re-assemble the meter, follow the steps in reverse order.

CF 67 10 M1291/N/0403 11279ML-02 Rev. A

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 80 81

Sin comentarios

Cooper-instruments-systems DFI INFINITY Digital Force Indicator/Controller Manual de usuario Pagina 15