Cooper-instruments-systems DFI Infinity CS Economy Digital Indicator Manual de usuario descargar pdf (Pagina 21)

DFI INFINITY CS (V- M3598/N/0906) 18 CF 70

4.5 Selecting a Display Color

Refer to Table 6-1 for a summary list of menu configuration.

Selecting Display Color is not active unless your meter is a Version “B”.

To select a display color, follow these steps:

1. Press the MENU button until the meter shows

2. Press the X/TARE button. The meter shows one of the following:

•

3. Press the S/NT/GRS button to scroll between available choices.

Press the MENU button to store your choice. The meter momentarily shows

, followed by the next menu

(Setpoint 1 Configuration). Or you can press the RESET button to abort and go back to the menu.

4.6 Using Setpoint 1 Configuration

Refer to Table 6-1 for a summary list of menu configuration.

Setpoint 1 Configuration

is not active unless your meter has dual relay output capabilities. The LED’s will

display whether the

is active or not. You may use Setpoint 1 Configuration for the following:

• To set the setpoint’s active band above or below your chosen value

• To select whether the setpoint operation is latched or unlatched

• Assigning setpoint values to the net or gross reading

4.6.1 Setting Setpoint 1’s Active Band

1. Press the MENU button until the meter shows .

2. Press the X/TARE button. The meter shows one of the following:

•

= (Active above the setpoint) (Default)

•

= Active below the setpoint

3. Press the S/NT/GRS button to toggle between available choices.

4. Press the X/TARE button to select if Setpoint 1 is latched/unlatched or press the MENU button to store your

selection. The unit shows

4.6.2 Selecting if Setpoint 1 is Latched of Unlatched

1. Press the MENU button until displays, then press the X/TARE button twice.

Press the X/TARE button from

The meter shows one of the following:

•

= Setpoint 1 to be unlatched (Default)

•

= Setpoint 1 to be latched

2. Press the S/NT/GRS button to toggle between available choices.

3. Press the X/TARE button to assign Setpoint 1 values to net or gross reading or press the MENU button to

enter

(Setpoint 2 Configuration).

4.6.3 Assigning Setpoint 1 Values to Net or Gross Readings

1. Press the MENU button until displays, then press the X/TARE button twice.

Press the X/TARE button from

The meter shows one of the following:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comentarios a estos manuales

Sin comentarios

Cooper-instruments-systems DFI Infinity CS Economy Digital Indicator Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Cooper-instruments-systems DFI Infinity CS Economy Digital Indicator